|
Vacuum Lifters | Option | Extensions for Movable Pad Mounts
CM6MEVL
These Mount Extensions are available for many Powr-Grip® vacuum lifters that are equipped with Movable Pad Mounts, including MRT4-DC and MRTALP611LDC vacuum lifters. The option enables a vacuum lifter to handle windows with mullions or other loads with similar obstructions on the contact surface. However, it does reduce the lifting capacity in many instances. No tools are required, because cotterless hitch pins make installing or removing the Mount Extensions fast and easy, while maintaining all necessary safety standards.
In the same way as Movable Pad Mounts, Mount Extensions are designed for pad frames with a tube width of either 2" [51 mm] or 2-1/2" [63 mm]. The Mount Extensions also may be purchased with extension tubes of different sizes, as noted in the chart below, in order to extend the Movable Pad Mounts different distances from the pad frame. In addition, each Mount Extension is adjustable, to produce a greater or smaller extension distance, as required for your specific application. Please contact a Technical Sales Representative for more product information.
|
Pad Frame Tube Width
|
2" [51 mm]
|
2" [51 mm]
|
2-1/2" [63 mm]
|
2-1/2" [63 mm]
|
|
Extension Tube
Dimensions
|
2" x 2"
[51 x 51 mm]
|
2" x 3"
[51 x 76 mm]
|
2-1/2" x 2-1/2"
[63 x 63 mm]
|
2-1/2" x 3-1/2"
[63 x 89 mm]
|
|
Minimum – Maximum
Extension Distance
|
2-1/16" – 2-13/16"
[52 – 71 mm]
|
3-1/16" – 3-13/16"
[78 – 97 mm]
|
2-9/16" – 3-5/16"
[65 – 84 mm]
|
3-9/16" – 4-1/4"
[90 – 110 mm]
|
Please contact your authorized dealer for pricing and delivery information.
|
Environmental conditions can affect product performance and longevity; consult the product instructions or contact a Technical Sales Representative for more information.
|
| 0.0/09-09 |
Based on product information at time of publication.
|
|
Home
View for printing
Download Spec Sheet
Send to a colleague
