Designed for use with a crane or other hoisting equipment, flat
lifters employ vacuum to hold a load for lifting in the flat orientation.
This high-capacity flat lifter was originally designed to lift stainless steel
plates and other sheet metals. With a lifting capacity of 2500 lbs [1135
kg], it features AC power and extends to a remarkable 14 feet [4.25 m] in
length. The telescoping pad frame enables the lifting of large-dimension
materials while providing the necessary support across the load surface.
This FL10HV11ACS vacuum lifter is equipped with ten 10" [25 cm] vacuum pads, and
features manual valves to control vacuum at the outermost pads. This
provides for versatility in handling loads of varying sizes, including those
smaller than the pad frame. A green vacuum lift light indicates when the
vacuum level is sufficient for lifting the maximum load weight. A
dial-type vacuum gauge allows the operator to monitor the current vacuum level
in positive inches of Hg or negative kPa. The lifter also comes equipped
with a vacuum reserve tank to help prevent immediate loss of vacuum in case of
power failure.
FEATURES:
Green lift light indicates when vacuum level is
sufficient for lifting maximum load weight -
Operator can visually identify when there is sufficient vacuum to lift at maximum capacity
Vacuum gauge enables monitoring of vacuum levels in positive inches of HG
and negative kPa -
Operator can visually determine whether vacuum level is adequate for lifting
Vacuum line filter prevents contaminants from blocking
vacuum lines or damaging valves & pump -
Helps to prevent vacuum system failure and unnecessary damage to equipment
Vacuum reserve tank helps prevent immediate vacuum loss in case of power
failure -
This helps prevent unexpected load release
Vacuum pad shutoff valves allow for versatility in load size
-
Enables one lifter to handle many different sized loads, adds
convenience and saves money on
equipment
Spring-mounted vacuum pads adjust
orientation to match angle of load surface -
Promote ease of performance when attaching to loads
Parking stand protects pads from contacting dirt
and contaminants when lifter is set down -
Helps prevent damage to vacuum pads and keeps them in good condition
Movable Vacuum Pad Mounts
allow vacuum pads to be removed and repositioned at various predetermined
locations on the pad frame - Allows operator to change the overall pad spread in just moments -
enables a single vacuum lifter to handle a wide variety of load dimensions and
avoid holes in materials through versatility in vacuum pad placement, saving
time and money
SPECIFICATIONS:
Vacuum Pad Spread:
Minimum Width - 36" [914 mm]
Maximum Width - 59" [1499 mm]
Minimum Length - 111" [2819 mm]
Maximum Length - 168" [4267 mm]
Number / Size of Vacuum Pads:
10/ 10" [25cm] dia. lipped vacuum pads
Load Capacity*:
Maximum - 2500 lbs [1135 kg]
Per-Pad - 250 lbs [113.5 kg]
(*On smooth, nonporous surfaces. Please
contact
us for recommendations on other surfaces.)
Weight of Vacuum Lifter:
800 lbs [363 kg]
Standard Operating Power:
120 volts AC, 50/60 hertz
Load Movement:
Flat to Flat
Please CONTACT US for pricing and delivery information.
Home
View for printing
Send to a colleague
