Designed for use with a crane or other hoisting equipment, flat
lifters employ vacuum to hold a load for lifting in the flat orientation.
This high-capacity flat lifter was originally designed to lift stainless steel
plates and other sheet metals. With a lifting capacity of 2500 lbs [1135
kg], it features AC power and extends to a remarkable 14 feet [4.25 m] in
length. The telescoping pad frame enables the lifting of large-dimension
materials while providing the necessary support across the load surface.
This FL10HV11ACS vacuum lifter is equipped with ten 10" [25 cm] vacuum pads, and
features manual valves to control vacuum at the outermost pads. This
provides for versatility in handling loads of varying sizes, including those
smaller than the pad frame. A green vacuum lift light indicates when the
vacuum level is sufficient for lifting the maximum load weight. A
dial-type vacuum gauge allows the operator to monitor the current vacuum level
in positive inches of Hg or negative kPa. The lifter also comes equipped
with a vacuum reserve tank to help prevent immediate loss of vacuum in case of
power failure.
FEATURES:
-
Green lift light indicates when vacuum level is
sufficient for lifting maximum load weight -
Operator can visually identify when there is sufficient vacuum to lift at maximum capacity
-
Vacuum gauge enables monitoring of vacuum levels in positive inches of HG
and negative kPa -
Operator can visually determine whether vacuum level is adequate for lifting
-
Vacuum line filter prevents contaminants from blocking
vacuum lines or damaging valves & pump -
Helps to prevent vacuum system failure and unnecessary damage to equipment
-
Vacuum reserve tank helps prevent immediate vacuum loss in case of power
failure -
This helps prevent unexpected load release
-
Vacuum pad shutoff valves allow for versatility in load size
-
Enables one lifter to handle many different sized loads, adds
convenience and saves money on
equipment
-
Spring-mounted vacuum pads adjust
orientation to match angle of load surface -
Promote ease of performance when attaching to loads
-
Parking stand protects pads from contacting dirt
and contaminants when lifter is set down -
Helps prevent damage to vacuum pads and keeps them in good condition
-
Movable Vacuum Pad Mounts
allow vacuum pads to be removed and repositioned at various predetermined
locations on the pad frame -
Allows operator to change the overall pad spread in just moments -
enables a single vacuum lifter to handle a wide variety of load dimensions and
avoid holes in materials through versatility in vacuum pad placement, saving
time and money
SPECIFICATIONS:
Vacuum Pad Spread:
Minimum Width - 36" [914 mm]
Maximum Width - 59" [1499 mm]
Minimum Length - 111" [2819 mm]
Maximum Length - 168" [4267 mm]
Number / Size of Vacuum Pads:
10/ 10" [25cm] dia. lipped vacuum pads
Load Capacity*:
Maximum - 2500 lbs [1135 kg]
Per-Pad - 250 lbs [113.5 kg]
(*On smooth, nonporous surfaces. Please
contact
us for recommendations on other surfaces.)
Weight of Vacuum Lifter:
800 lbs [363 kg]
Standard Operating Power:
120 volts AC, 50/60 hertz
Load Movement:
Flat to Flat
Please CONTACT US for pricing and delivery information.
|
