|
Vacuum Lifters | Flat Lifters | Custom Flat Lifter
FL12HV11DCS
This vacuum lifter features an astounding 3000 lbs [1360 kg] capacity, making it the DC powered, heavy-weight champ in Powr-Grip’s® Flat Lifter series for materials handling. Its self-contained 12-volt DC vacuum system allows for cord-free operations, so the lifter can be used in various locations. The compact design, coupled with its high load capacity, enables it to lift anything from steel to heavy stone. Vacuum pad mounts are movable to let you modify the lifter’s configuration to fit your load shape. They are also spring mounted, which enables self-adjustment to achieve the best grip on the load. Control handles also serve as parking stands to protect vacuum pads from damage when lifter is not in use.
FEATURES:
-
Green lift light indicates when vacuum level is
sufficient for lifting maximum load weight -
Operator can visually identify when there is sufficient vacuum to lift at
maximum capacity
-
Movable Vacuum Pad Mounts
allow vacuum pads to be removed and repositioned at various predetermined
locations on the pad frame -
Allows operator to change the overall pad spread in just moments -
enables a single vacuum lifter to handle a wide variety of load dimensions and
avoid holes in materials through versatility in vacuum pad placement, saving time
and money
-
Twist-lock Electrical Plug
prevents accidental power loss due to disconnection from power source -
Saves
money on damaged materials and prevents possible injury
-
Blow-off for quick
material release -
Allows operator to rapidly release materials to maintain efficiency and speed in
an assembly-line environment
-
Vacuum gauge enables monitoring of vacuum levels in positive inches of HG
and negative kPa -
Operator can visually determine whether vacuum level is adequate for lifting
-
Vacuum line filter prevents contaminants from blocking
vacuum lines or damaging valves & pump -
Helps to prevent vacuum system failure and unnecessary damage to equipment
-
Vacuum reserve tank helps prevent immediate vacuum loss in case of power
failure -
This helps prevent unexpected load release
-
Vacuum pad shutoff valves allow for versatility in load size
-
Enables one lifter to handle many different sized loads, adds
convenience and saves money on equipment
-
Spring-mounted vacuum pads adjust orientation to match angle of load surface -
Promote ease of performance when attaching to loads
-
Parking stand protects pads from contacting dirt
and contaminants when lifter is set down -
Helps prevent damage to vacuum pads and keeps them in good
condition
SPECIFICATIONS:
Vacuum Pad Spread:
23" x 23" [584 mm x 584 mm] (minimum)
43" x 71" [1092 mm x 1803 mm]
(maximum)
Number / Size of Vacuum
Pads:
12 / 10" [254 mm] diameter lipped
vacuum pads
Load Capacity*:
3000 lbs [1360 kg]
(*On smooth, nonporous surfaces.
Please contact us for recommendations on other surfaces.)
Weight of Vacuum Lifter:
272 lbs [124 kg]
Operating Power:
12 volts DC, 60 hertz
Charger Requirements:
120 volts DC, 60 hertz
Apply / Release Times:
4 seconds / 4 seconds (approx.)
Load Movement:
Flat to Flat
Please CONTACT US for pricing and delivery information.
| 
Home
View for printing
Send to a colleague
