Custom vacuum lifters come in a variety of sizes, shapes, capacities and configurations.
If you are having difficulty finding a lifter to fit your application, give us a call.
We can design a custom lifter to suit your material handling needs.
Here are just a few examples of lifters we have designed for customers in the past.
Large Sheet, Telescoping Flat Lifter
FL10HV11ACS This monster lifter extends out to a
remarkable 14 feet [4.25 m] and is ideal for lifting stainless steel,
steel plates and other flat-surfaced sheet metals in the flat orientation.
Power Tilter for Large, Fragile Materials
PT12HV11ACS With its twelve 10" [25 cm] vacuum pads,
and closed cell foam rings, this power tilter was designed to lift plywood
sheets and materials with rough or textured surfaces up to 1500 lbs [680 kg].
Large Frame, Stone Slab Power Tilter
PT14HV11AIRS Specifically designed to lift large,
fragile stone, this lifter provides powered 90° tilt movement for
versatility in load manipulation.
Capacity: 1500 lbs [680 kg]
High-Flow Vacuum
Manual Rotator
MR411LACS
With blow-off for quick release, this manual rotator was originally designed
to perform in a glass production environment. It sports four 11"
[28 cm] vacuum pads, 360° manual rotation and a lifting capacity of
700 lbs [320 kg].
Manual Rotator/Power Tilter with
Integrated Hoist
MRPT8HV11ACS Originally, this rotator/tilter was
manufactured for the purpose of placing armored siding on troop transports.
Suited to handle materials up to 1000 lbs [455 kg].
Air-Powered Manual Rotator
MR49AIRS Designed for use with a crane or
other hoisting equipment, this lifter boasts 360° manual rotation
with automatic locking at each 1/4 revolution (when desired). Ideal
for use on glass or other solid, nonporous loads up to 500 lbs [225 kg].
High-Capacity Flat Lifter with Independent Power Source
FL12HV11DCS A ton and a half? Not a problem
for this flat lifter. With an operational capacity rating of 3000 lbs
[1360 kg], it's perfect for lifting steel, great for general materials handling and it can even muscle
stone around (with optional closed cell foam rings).
Dual Vacuum, DC-Powered, Manual Tilt Cladding Lifter
MT4FS818DCS With vacuum pads that can be
reconfigured in a variety of ways, this manual tilter was originally
manufactured to meet the needs of a cladding handling company. It can
be configured to stretch to 183-3/4 in. [4668 mm] in length to facilitate
the handling of long cladding materials weighing up to 700 lbs [320 kg].
Home
View for printing
Send to a colleague
