|
Vacuum Lifters | Option | Remote Control System
EO8RC
The Remote Control System is available for certain Powr-Grip vacuum lifters that are equipped with a 1-SCFM [28 liters/minute], DC-powered vacuum system.* This option allows operators to release the load from remote locations, as may be required for multi-story installations. Lifters equipped with the Remote Control System automatically come with the Dual Vacuum System (Option EO10DVS), as well.
FEATURES:
Specifications:
Radio controlled (FM modulated RF signal)
FCC and CE compliant
Operator’s license not required
Unique codes prevent hazards caused by interference from other radio or remote transmitters,
as well as electromagnetic transmission sources
Different frequencies are available, to allow multiple systems to transmit simultaneously
in the same location
Up to 250 ft [76 m] transmission range
Transmitter Controls:
Apply: Engages vacuum at pads
Enable: Allows release or stand-by functions
Stand-By: Conserves battery energy between lifts
Release: Applies air pressure at pads for quick load release
On-Board Controls:
Main power switch
Apply, Release, Stand-By and Enable push-button switches
On-Board Indicators:
Strobe light: Warns that load release is possible
Red light: Warns of low vacuum
Green lift light: Indicates acceptable vacuum level for lifting
Vacuum gauge: Indicates current vacuum level
Battery gauge: Indicates current energy level
*Currently available for use with radio frequencies in the United States, Europe and some other locations. Contact your Technical Sales Representative for additional product information.
Please contact your authorized dealer for pricing and delivery information.
Related Articles: (1)
| Rev 1.0/08-05 |
Based on product information at time of publication.
|
|