|
Vacuum Lifters | Rotator/Tilters | Quadra-Tilt Rotators 1200 & 1400
MRTA811LDC
MRTA8HV11DC
Along with a high-flow vacuum system,
these vacuum lifters feature Powr-Grip's® innovative Quadra-Tilt linkage,
continuous 360° rotation and a wide variety of frame configurations,
for maximum performance and versatility at the construction site or in the factory.
MRTA811LDC Vacuum Lifter shown with optional standard-flow power system.
The Quadra-Tilt Vacuum Lifters feature an innovative four-bar tilt mechanism that significantly reduces the effort of tilting heavy loads between flat and upright positions. This tilt mechanism also reduces hazards associated with lifting loads from upright racks: When a load is tilted to either the upright or the flat position, the vacuum lifter maintains the load position automatically without using latches, eliminating the tendency for a load to “kick back” at the operator’s knees.
These vacuum lifters also feature 360° manual rotation, (re)movable vacuum pads and extension arms that accommodate a variety of load sizes and shapes.
Standard Vacuum Pad Spread: MRTA811LDC
49-1/4" x 72-3/4" [1248 x 1845 mm] (basic configuration)
36-3/4" x 51" [931 x 1295 mm] (small configuration)*
123-1/4" x 13-3/4" [3130 x 352 mm] (linear configuration)*
69-1/4" x 107-1/2" [1758 x 2728 mm] (extended configuration)
*Capacity reduced in this configuration.
MRTA8HV11DC
subtract 1" [25 mm] from each dimension listed above
Number / Size of Vacuum Pads:
MRTA811LDC - 8 / 11" [28 cm] dia. lipped vacuum pads
MRTA8HV11DC - 8 / 10" [25 cm] dia. lipped vacuum pads
Load Capacity:
MRTA811LDC - 1400 lbs [635 kg]
MRTA8HV11DC - 1200 lbs [545 kg]
(On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.)
Average Weight of Vacuum Lifter:
302 lbs [137 kg]
Standard Operating Power:
12 volts DC, 26 amps
Load Movement:
Manual rotation, 360° edgewise, with automatic locking at each 1/4 revolution
Assisted manual tilt, 90° between upright and flat
Standard Features:
High-flow vacuum system
Low vacuum warning light
On-board battery and charger
Battery energy gauge
Vacuum gauge
Vacuum line filter
Vacuum reserve tank
Spring-mounted vacuum pads
(Re)movable vacuum pad mounts
Vacuum pad extension arms
Blow-off for quick release
Alternative Power Systems:
Standard-flow DC power system (MRTA811LDC or MRTA8HV11DC)
AC power system (MRTA811LAC or MRTA8HV11AC)
Air (venturi) power system (MRTA811LAIRS or MRTA8HV11AIRS)
(Specifications may not be as listed above. Please contact us for more information.)
Available Options:
Dual vacuum system (EO10DVS)
Vacuum loss warning buzzer (EO3VLW)
Long vacuum pad extension arms (CF5LEAO)
Closed cell foam vacuum pad rings (FRHV11)
(Available on MRTA8HV11 lifters only)
Tilt lock (LB8TLO)
Pad frame T-arm assemblies (CF13CEO)
Design Standards:
ASME B30.20-2006
(BTH-1 Design Category "B", Service Class "0")
AS 4991-2004
Please contact your authorized dealer for pricing and delivery information.
|
Environmental conditions can affect product performance and longevity; consult the product instructions or contact a Technical Sales Representative for more information.
|
| Rev 1.4 / 02-12 |
Based on product information at time of publication.
|
|
Home
All Products
View for printing
Download Spec Sheet
