|
Vacuum Lifters | Multipurpose Lifters | Cladding Lifter 700 (VIFS818 Pads)
MTCL6FS818DC
This product is no longer available.
Please contact your
Technical Sales Representative
for alternative solutions.
This versatile, DC-powered manual tilter features a dual vacuum system
and can be configured up to 188-1/4" [4781 mm] in length to lift
long cladding materials weighing up to 700 lbs [320 kg].
Standard Vacuum Pad Spread:
Minimum Width - 18-1/4" [463 mm]
Maximum Width - 48-1/2" [1229 mm]
Minimum Length - 18-1/4" [462 mm]
Maximum Length - 188-1/4" [4781 mm]
(see Spec Sheet for configuration details)
Number / Size of Vacuum Pads:
2 - 6 (variable) / 8-1/2" x 18-1/2" [21 x 47 cm] vacuum pads
(see Spec Sheet for configuration details)
Maximum Load Capacity*:
350 - 700 lbs [160 - 320 kg] (variable)
(see Spec Sheet for configuration details)
(*on nonporous surfaces with up to 3/8" [9.5 mm] relief.
Please contact us for recommendations on other surfaces.)
Weight of Vacuum Lifter:
360 lbs [164 kg] (maximum)
(245 lbs [112 kg] without pad frame extensions)
Standard Operating Power:
12 volts DC, 26 amps
Load Movement:
Manual tilt, 90° between upright and flat, with hydraulic damping and
automatic latching in the upright and flat positions (when desired)
Standard Features:
Dual vacuum system
Movable control pendant
Low vacuum warning buzzer
Green lift light
On-board battery and charger
Battery energy gauge
Vacuum gauges
Vacuum line filters
Vacuum reserve tanks
Spring-mounted vacuum pads
Pad frame extensions
(Re)movable, 90° rotating vacuum pad mounts
Closed cell foam pads (for surface contours up to 3/8" [9.5 mm] in depth)
Available Options:
Remote control system (EO8RC3)
Design Standards:
ASME B30.20-2006
(BTH-1 Design Category "B", Service Class "0")
CE
The Dual Vacuum System features two vacuum line circuits, allowing the vacuum lifter to maintain the vacuum level for one circuit even if an unexpected vacuum loss occurs in the other one. This system is designed to reduce the risk of falling loads, which could result from breakage or other accidents that compromise one area of the vacuum system. In addition, it features audible and visible alarms that warn the operator whenever the vacuum level is not sufficient for lifting the maximum load weight. Complies with CE Standard EN 13155.
The MTCL6FS818DC Cladding Lifter is sold in Europe and the United Arab Emirates exclusively by AKAWA GGR UNIC. In other locations, please contact your authorized dealer for pricing and delivery information.
Related Articles: (1)
|
Environmental conditions can affect product performance and longevity; consult the product instructions or contact a Technical Sales Representative for more information.
|
| Rev 0.3 / 02-10 |
Based on product information at time of publication.
|
|
Home
View for printing
Download Spec Sheet
Send to a colleague
