|
Vacuum Lifters | Multipurpose Lifters | Channel Lifters - P1
P11104DC
P11004DC
P1HV1104DC
In addition to a modular design, these Powr-Grip® vacuum lifters
provide 180° rotation and 90° tilt, for expandability and a full range
of load motion at the installation site or on the shop floor.
Channel Lifters are comprised of one or more Pad Channels and interchangeable Lift Frames for manually rotating and tilting materials. These vacuum lifters may be ordered as complete units or as individual components to expand existing Channel Lifter systems. Lift Frames are available in single-channel or double-channel styles. Pad Channels can be switched from one frame to another in minutes.
Standard Vacuum Pad Spread:
P11104DC - 51" x 12" [1295 x 305 mm]
P11004DC - 49" x 10" [1245 x 254 mm]
P1HV1104DC - 50" x 11" [1270 x 280 mm]
Number / Size of Vacuum Pads:
P11104DC - 4 / 11" [28 cm] dia. lipped vacuum pads (for flat materials)
P11004DC - 4 / 10" [25 cm] dia. concave vacuum pads (for curved materials) P1HV1104DC - 4 / 10" [25 cm] dia. lipped vacuum pads (for rough materials)
Load Capacity*:
P11104DC - 700 lbs [320 kg]
P11004DC - 600 lbs [270 kg]
(Capacity is reduced on curved surfaces. Please contact us for more information.)
P1HV1104DC - 600 lbs [270 kg]
(*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.)
Average Weight of Vacuum Lifter:
70 lbs [32 kg]
Standard Operating Power:
12 volts DC, 10 amps (for each Pad Channel)
Load Movement:
Manual rotation, 180° edgewise, with locking in three positions. Manual tilt, 90° between upright and flat, with automatic latching in upright position
(Lifters can be tilted ONLY when lift bar is locked in center position, as shown above.)
Standard Features*:
On-board battery and charger
Battery energy gauge
Low vacuum warning light
Vacuum gauge
Vacuum line filter
Vacuum reserve tank
(*On each Pad Channel)
Alternative Power Systems:
Air (venturi) power system (P11104AIRS, P11004AIRS or P1HV1104AIRS)
AC power system (P11104AC, P11004AC or P1HV1104AC)
(Specifications may not be as listed above. Please contact us for more information.)
Available Components:
Pad Channels: Each channel features an independent, on-board vacuum generating system,
including vacuum pump, vacuum controls and all standard features listed above.
PC1104: (for flat materials) 4 / 11" [28 cm] dia. lipped vacuum pads
PC1004: (for curved materials) 4 / 10" [25 cm] dia. concave vacuum pads
PCHV1104: (for rough materials) 4 / 10" [25 cm] dia. lipped vacuum pads
Lift Frames:
PCFT1A1: For one Pad Channel
PCFT2SA45: For two Pad Channels, approx. 4-1/2' [1,38 m] vacuum pad spread
PCFT2SA7: For two Pad Channels, approx. 7' [2,14 m] vacuum pad spread
Interchangeable Arms: Vacuum pad spread can be changed if optional arms are purchased.
FA245: Optional arms convert PCFT2SA7 Lift Frame to PCFT2SA45 Lift Frame
FA27: Optional arms convert PCFT2SA45 Lift Frame to PCFT2SA7 Lift Frame
Available Options:
Dual vacuum system (EO10DVS)
Movable control pendant (EO9RP)
Remote control system (EO8RC1)
Individual vacuum pad shutoffs (CM1COWB)
Closed cell foam vacuum pad rings (FRHV11)
(Available on P1HV1104 lifters only)
ABS shipping case (53005)
Design Standards:
ASME B30.20-2006
(BTH-1 Design Category "B", Service Class "0")
CE
AS 4991-2004
Please contact your authorized dealer for pricing and delivery information.
Related Articles: (1), (2), (3)
Related Video: (1)
|
Environmental conditions can affect product performance and longevity; consult the product instructions or contact a Technical Sales Representative for more information.
|
| Rev 1.3/10-09 |
Based on product information at time of publication.
|
|
Home
View for printing
Download Spec Sheet
Send to a colleague
