|
Vacuum Lifters | Multipurpose Lifters | Channel Lifters - P2 (4.5)
P2110445DC
P2HV110445DC
Employing a unique system of interchangeable lift frames and
pad channels, these Powr-Grip® vacuum lifters conserve resources
while supplying maximum versatility in a variety of work settings.
Channel Lifters are comprised of one or more Pad Channels and interchangeable Lift Frames for manually rotating and tilting materials. These vacuum lifters may be ordered as complete units or as individual components to expand existing Channel Lifter systems. Lift Frames are available in single-channel or double-channel styles. Pad Channels can be switched from one frame to another in minutes.
Standard Vacuum Pad Spread:
P2110445DC - 51" x 54-1/4" [1295 x 1378 mm]
P2HV110445DC - 50" x 53-1/4" [1270 x 1353 mm]
Number / Size of Vacuum Pads:
P2110445DC - 8 / 11" [28 cm] dia. lipped vacuum pads
P2HV110445DC - 8 / 10" [25 cm] dia. lipped vacuum pads
Load Capacity*:
P2110445DC - 1400 lbs [635 kg]
P2HV110445DC - 1200 lbs [545 kg]
(*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.)
Average Weight of Vacuum Lifter:
171 lbs [78 kg]
Standard Operating Power:
12 volts DC, 10 amps (for each Pad Channel)
Load Movement:
Manual rotation, 180° edgewise, with locking in three positions.
Manual tilt, 90° between upright and flat, with automatic latching in upright position
(Lifters can be tilted ONLY when lift bar is locked in center position, as shown above.)
Standard Features*:
On-board battery and charger
Battery energy gauge
Low vacuum warning light
Vacuum gauge
Vacuum line filter
Vacuum reserve tank
(*On each Pad Channel)
Available Components:
Pad Channels: Each channel features an independent, on-board vacuum generating system,
including vacuum pump, vacuum controls and all standard features listed above.
PC1104: (for flat materials) 4 / 11" [28 cm] dia. lipped vacuum pads
PC1004: (for curved materials) 4 / 10" [25 cm] dia. concave vacuum pads
PCHV1104: (for rough materials) 4 / 10" [25 cm] dia. lipped vacuum pads
Lift Frames:
PCFT1A1: For one Pad Channel
PCFT2SA45: For two Pad Channels, approx. 4-1/2' [1,38 m] vacuum pad spread
PCFT2SA7: For two Pad Channels, approx. 7' [2,14 m] vacuum pad spread
Interchangeable Arms: Vacuum pad spread can be changed if optional arms are purchased.
FA245: Optional arms convert PCFT2SA7 Lift Frame to PCFT2SA45 Lift Frame
FA27: Optional arms convert PCFT2SA45 Lift Frame to PCFT2SA7 Lift Frame
Available Options:
Dual vacuum system (EO10DVS)
AC power system (P2110445AC and P2HV110445AC)
(Specifications may not be as listed above. Please contact us for more information.)
Movable control pendant (EO9RP)
Remote control system (EO8RC1)
Individual vacuum pad shutoffs (CM1COWB)
Closed cell foam vacuum pad rings (FRHV11)
(Available on P2HV1104 lifters only)
Counter-Balancer (CB1)
Design Standards:
ASME B30.20-2006
(BTH-1 Design Category "B", Service Class "0")
CE
AS 4991-2004
Please contact your authorized dealer for pricing and delivery information.
|
Environmental conditions can affect product performance and longevity; consult the product instructions or contact a Technical Sales Representative for more information.
|
| Rev 1.2 / 10-09 |
Based on product information at time of publication.
|
|
Home
View for printing
Download Spec Sheet
Send to a colleague
