Handling auto body panels can be a challenge, whether in the body shop or on the production line. That's why Wood's Powr-Grip® is pleased to offer a full line of hand-held vacuum cups and below-the-hook vacuum lifters for just such purposes. WPG pump-style vacuum cups put a handle where you need it on a wide variety of curved or flat surfaces, while leaving panel edges free for easy installation. Powr-Grip vacuum lifters enable a single operator to lift heavy, awkward panels while improving safety and efficiency. Unlike traditional materials handling methods, WPG vacuum attaching equipment provides a convenient and secure way to move panels, with little risk of damage or injury.

• A red-line indicator or available Audio Alarm on Powr-Grip hand cups alerts the user of any significant vacuum loss.
• Flexible rubber vacuum pads used in WPG products attach securely to nonporous materials, without harming most surfaces.
• Vacuum gauges with colored zones on Powr-Grip vacuum lifters clearly indicate whether vacuum is sufficient for lifting.
• Indicator lights and buzzers signal when a WPG vacuum lifter is ready to move the load.

• Perfect for lifting and installing a variety of auto body panels.
• Transfer panels effortlessly from storage areas to production equipment.
• Load and unload machines for stamping, bending or finishing operations.
• Tilt panels easily to the correct angle for processing or installation.
• Also suitable for installing sun roofs, moon roofs and side lites.

• Lightweight and easy to use, thus reducing operator fatigue and avoiding operator injuries.
• Rapid apply and release times increase operator productivity.
• Specially designed concave vacuum pad attaches to a wide variety of curved or flat panels.
• Enables a single operator to handle panels, increasing efficiency and reducing labor costs.
• 90º tilt provides accuracy to adjust angle of panels as needed.
• Standard compressed air power system (not shown) integrates easily into existing power supply of manufacturing facility.
• High-quality, industrial strength construction for durability.

model:
MT1TL6FAIR

• Ideal for lifting and installing truck hoods and other body panels.
• Transfer heavy panels effortlessly from storage areas to production equipment.
• Load and unload machines for stamping, bending or finishing operations.
• Tilt panels easily to the correct angle for processing or installation.
• Also suitable for installing many windshields and auto windows.

• Enables a single operator to handle heavy panels, increasing efficiency and reducing labor costs.
• Ergonomically designed to promote ease of handling, thus reducing operator fatigue and avoiding operator injuries.
• Specially designed concave vacuum pad attaches to a wide variety of curved or flat panels.
• 90º tilt provides accuracy to adjust angle of panels as needed.
• Rapid apply and release times increase operator productivity.
• Self-contained DC power system enables operation from cranes, forklifts or hoists, in a wide variety of locations.
• Available compressed air power system integrates easily into existing power supply of manufacturing facility.

model:
MT110DC

• Ideal for lifting and installing truck hoods and other body panels.
• Transfer extremely heavy panels effortlessly from storage areas to production equipment.
• Load and unload machines for stamping, bending or finishing operations.
• Tilt panels easily to the correct angle for processing or installation.
• Also suitable for installing many windshields and auto windows.

• All the advantages of the MT110DC plus twice the load capacity.
• Enables a single operator to handle heavy panels, increasing efficiency and reducing labor costs.
• Ergonomically designed to promote ease of handling, thus reducing operator fatigue and avoiding operator injuries.
• Specially designed concave vacuum pad attaches to a wide variety of curved or flat panels.
• 90º tilt provides accuracy to adjust angle of panels as needed.
• Self-contained DC power system enables operation from cranes, forklifts or hoists, in a wide variety of locations.
• Available compressed air power system integrates easily into existing power supply of manufacturing facility.

model:
MT210DC

• Ideal for lifting and installing truck hoods and other body panels.
• Transfer extremely heavy panels effortlessly from storage areas to production equipment.
• Load and unload machines for stamping, bending or finishing operations.

• Features the highest load capacity of any single-pad Powr-Grip vacuum lifter.
• Enables a single operator to handle heavy panels, increasing efficiency and reducing labor costs.
• Ergonomically designed to promote ease of handling, thus reducing operator fatigue and avoiding operator injuries.
• Specially designed concave vacuum pad attaches to a wide variety of curved or flat panels.
• Rapid apply and release times increase operator productivity.
• Self-contained DC power system enables operation from cranes, forklifts or hoists, in a wide variety of locations.
• Available compressed air power system integrates easily into existing power supply of manufacturing facility.

model:
FL110DC

• Put handles where you need them lift and move awkward panels easily.
• Hold auto body panels for grinding, sanding and buffing operations.
• Great for removing or installing body panels, while leaving the edges free to check fit.
• Also ideal for removing or installing windshields, side lites and back lites.  

• Ergonomically designed handle provides comfortable hand placement and maximum load control.
• Helps prevent worker fatigue and avoid worker injury.
• Attaches to curved or flat surfaces for maximum flexibility of use.
• Non-slip grip holds the panel securely at any angle.
• Rapid apply and release times increase worker productivity.
• Vacuum pad will not mark or damage most surfaces.
• High-quality, industrial strength construction for durability.
• Available Audio Alarm alerts user of any significant loss in vacuum.
• 12-month warranty against defects in materials or craftsmanship.

model:
LJ6VH

• Put handles where you need them lift and move awkward panels easily.
• Hold auto body panels for grinding, sanding and buffing operations.
• Great for removing or installing body panels, while leaving the edges free to check fit.
• Also ideal for removing or installing windshields, side lites and back lites.  

• Ergonomically designed handle provides ease of use and maximum load control.
• Helps prevent worker fatigue and avoid worker injury.
• Attaches to curved or flat surfaces for maximum flexibility of use.
• Rapid apply and release times increase worker productivity.
• Vacuum pad will not mark or damage most surfaces.
• High-quality, industrial strength construction for durability.
• 12-month warranty against defects in materials or craftsmanship.

model:
TL6HG

• Put handles where you need them lift and move awkward panels easily.
• Hold auto body panels for grinding, sanding and buffing operations.
• Great for removing or installing body panels, while leaving the edges free to check fit.
• Also good for removing or installing windshields, side lites and back lites.  

• Smaller diameter enables applications in on smaller surfaces.
• Ergonomically designed handle provides ease of use and maximum load control.
• Helps prevent worker fatigue and avoid worker injury.
• Attaches to semicurved or flat surfaces for maximum flexibility of use.
• Rapid apply and release times increase worker productivity.
• Vacuum pad will not mark or damage most surfaces.
• High-quality, industrial strength construction for durability.
• 12-month warranty against defects in materials or craftsmanship.

model:
LJ45HG

• Put handles where you need them lift and move awkward panels easily.
• Hold auto body panels for grinding, sanding and buffing operations.
• Great for removing or installing body panels, while leaving the edges free to check fit.
• Also suitable for removing or installing windshields, side lites and back lites.

• Offset handle design is ideal for gripping loads held at the user's side.
• Helps prevent worker fatigue and avoid worker injury.
• Attaches to curved or flat surfaces for maximum flexibility of use.
• Rapid apply and release times increase worker productivity.
• Vacuum pad will not mark or damage most surfaces.
• High-quality, industrial strength construction for durability.
• 12-month warranty against defects in materials or craftsmanship.

model:
TL6RH

• Put handles where you need them lift and move awkward panels easily.
• Hold auto body panels for grinding, sanding and buffing operations.
• Great for removing or installing body panels, while leaving the edges free to check fit.
• Also suitable for removing or installing windshields, side lites and back lites.

• Ergonomically designed to promote ease of load handling.
• Help prevent worker fatigue and avoid worker injury.
• Rapid apply and release times increase worker productivity.
• Vacuum pad will not mark or damage most surfaces.
• High-quality, industrial strength construction for durability.
• 12-month warranty against defects in materials or craftsmanship.

all models