There are a variety of choices when it comes to lifting, maneuvering and installing insulated metal panels and related cladding materials, but few have as many benefits as vacuum-attaching products from Wood's Powr-Grip®.

• Ergonomically designed to reduce worker fatigue and related injuries.
• Quick attachment and release to increase productivity.
• No wrestling with slings or hooks that can damage panels and slow installation.
• Attach directly to the face of the panel, keeping edges free for exact panel placement.
• Vacuum pads will not slip or damage the surface of panels.

• Lifting, tilting and installing insulated metal roof panels.
• Lifting, tilting and installing insulated metal wall panels.
• Installing insulated panels in upright horizontal orientation.
• Installing composite panels in upright vertical orientation.
• Installing cold storage materials.

• Narrow, foam rubber vacuum pads fit between panel contours and across surface textures up to 3/8" [10 mm] in relief.
  (Note: Not intended for use with single-skin metal panels.)
• Sliding pad mounts and adjustable Pad frame T-Arm assemblies accommodate a wide variety of insulated panel sizes and contours.
• Available pad frame extension arms, rocker arms and additional T-arms provide support for roof panels up to 1100 lbs [500 kg] in weight and over 60' [18.3 m] in length (see options below).
• On-board DC power system enables cord-free operation at the job site.
• 180º rotation and 90º tilt provide a wide range of motion for load manipulation.
• Standard Dual Vacuum System helps reduce risk of falling loads.
• Low profile is ideal for installing materials in tight work locations.
• Compliant with relevant CE and ANSI standards.

model:
MRTALPR4FS625DC

• Lifting, tilting and installing insulated metal roof panels.
• Lifting, tilting and installing insulated metal wall panels.
• Installing insulated panels in upright horizontal orientation.
• Installing composite panels in upright vertical orientation.
• Installing cold storage materials.

• Round vacuum pads made with low-marking rubber and foam rubber rings attach to many different panels with surface texture up to 1/8" [3 mm] in relief.
• Movable pad mounts and adjustable Pad frame T-Arm assemblies accommodate a wide variety of insulated panel sizes and textures.
• Available pad frame extension arms, rocker arms and additional T-arms provide support for roof panels up to 1100 lbs [500 kg] in weight and over 60' [18.3 m] in length (see options below).
• On-board DC power system enables cord-free operation at the job site.
• 180º rotation and 90º tilt provide a wide range of motion for load manipulation.
• Standard Dual Vacuum System helps reduce risk of falling loads.
• Low profile is ideal for installing materials in tight work locations.
• Compliant with relevant CE and ANSI standards.

model:
MRTALPR4HV11FDC

• Used with Panel Master Vacuum Lifters to install insulated roof panels and other cladding materials in the flat orientation.
• Can support metal roof panels from 18' to 55' [5.5–15 m] in length.
• Can be combined with rocker arms and T-arm assemblies to lift even longer and heavier roof panels (see related products).

• Specially designed to enable most MRTALP-DC vacuum lifters to install long roof panels without the expense of a large panel lifter.
• Cotterless hitch pins and vacuum hose quick connectors make installation fast and easy, without the need for tools.
• Optionally available with new vacuum lifters or retrofittable to existing vacuum lifters.
• High-quality, industrial strength construction for durability.
• 12-month warranty against defects in materials or craftsmanship.

model:
CF14CEO

See all related
configurations & capacities
with VPFS625 Vacuum Pads

configurations & capacities
with HV11F Vacuum Pads

• Used with Panel Master Vacuum Lifters to install insulated roof panels and other cladding materials in the flat orientation.
• Can be combined with extension kit and T-arm assemblies to lift longer and heavier roof panels (see related products).
• With related products, can help support metal roof panels from 24' to 60' [7.5–18.5 m] in length and weighing up to 1100 lbs [500 kg].

• Specially designed to enable most MRTALP-DC vacuum lifters to install long, heavy roof panels without the expense of a large panel lifter.
• Cotterless hitch pins and vacuum hose quick connectors make installation fast and easy, without the need for tools.
• Optionally available with new vacuum lifters or retrofittable to existing vacuum lifters.
• High-quality, industrial strength construction for durability.
• 12-month warranty against defects in materials or craftsmanship.

model:
CF15CEO

See all related
configurations & capacities
with VPFS625 Vacuum Pads

configurations & capacities
with HV11F Vacuum Pads

• Used with Panel Master Vacuum Lifters to install insulated roof panels and other cladding materials in the flat orientation.
• Can be combined with extension kit and rocker arms to lift longer and heavier roof panels (see related products).
• With related products, can help support metal roof panels from 24' to 60' [7.5–18.5 m] in length and weighing up to 1100 lbs [500 kg].
• Also compatible with MRT4-DC, MRTA6-DC, MRTALP6-DC & MRTA8-DC vacuum lifters to install insulated panels with high contours.

• Vacuum pads feature flexible foam rubber that conforms to surface contours up to 3/8" [10 mm].
  (Note: Not intended for use with single-skin metal panels.)
• T-arm ssemblies are equipped with sliding pad mounts for maximum flexibility to handle different size materials.
• Cotterless hitch pins and vacuum hose quick connectors make installation fast and easy, without the need for tools.
• Optionally available with new vacuum lifters or retrofittable to existing vacuum lifters.
• High-quality, industrial strength construction for durability.
• 12-month warranty against defects in materials or craftsmanship.

model:
CF13CEO

See all related
configurations & capacities
with VPFS625 Vacuum Pads

configurations & capacities
with HV11F Vacuum Pads

• Lifting, tilting and installing insulated metal roof panels.
• Lifting, tilting and installing insulated metal wall panels.  
• Installing insulated panels in upright horizontal orientation.
• Installing composite panels in upright vertical orientation.  
• Installing cold storage materials.

• Specifically developed for secure and efficient handling of insulated metal panels and other cladding products.
• Ergonomic design helps prevent operator fatigue and avoid operator injury.
• 90º tilt with automatic damping provides accuracy to adjust angle of roofing, siding and other cladding materials as needed.
• Standard extension arms and movable vacuum pads provide maximum flexibility and support to handle different material sizes.
• A wide variety of frame configurations accommodates both wall and roof panels up to 50 feet [15.2 m] long.
• Vacuum pads feature flexible foam rubber that conforms to surface contours up to 3/8" [10 mm]. Adjustable pads fit between higher contours.
  (Note: Not intended for use with single-skin metal panels.)
• Standard Dual Vacuum System helps reduce risk of falling loads.
• On-board DC power system enables cord-free operation at the job site.
• Compliant with relevant CE and ANSI standards.

model:
MTCL6FS625DC

• Lifting, tilting and installing insulated metal roof panels.
• Lifting, tilting and installing insulated metal wall panels.  
• Installing insulated panels in upright horizontal orientation.
• Installing composite panels in upright vertical orientation.  
• Installing cold storage materials.

• Specifically developed for secure and efficient handling of insulated metal panels and other cladding products.
• Ergonomic design helps prevent operator fatigue and avoid operator injury.
• 90º tilt with automatic damping provides accuracy to adjust angle of roofing, siding and other cladding materials as needed.
• Standard extension arms and movable vacuum pads provide maximum flexibility and support to handle different material sizes.
• A wide variety of frame configurations accommodates both wall and roof panels up to 50 feet [15.2 m] long.
• Vacuum pads feature flexible foam rubber that conforms to surface contours up to 1/8" [3 mm]. Adjustable pads fit between higher contours.
• Standard Dual Vacuum System helps reduce risk of falling loads.
• On-board DC power system enables cord-free operation at the job site.
• Compliant with relevant CE and ANSI standards.

model:
MTCL8HV11FDC

• Lifting, tilting and installing metal roof panels.
• Lifting, tilting and installing metal wall panels.
• Installing insulated panels in upright horizontal orientation.
• Installing composite panels in upright vertical orientation.
• Installing cold storage materials.

• Standard closed cell foam pad rings enable attachment on materials with surface texture.
• Low profile is ideal for installing materials in tight work locations.
• Standard Dual Vacuum System helps reduce risk of falling loads.
• Multiple frame configurations enable the operator to handle a wide variety of material sizes and shapes.
• 180º rotation and 90º tilt provide a wide range of motion for load manipulation.
• On-board DC power system enables cord-free operation at the job site.
• Compliant with relevant CE and ANSI standards.

model:
MRTALP6HV11FDCO

• Setting roof panels into position.
• Setting wall panels into position.
• Setting cold storage panels into position.
• Tying off control lines to insulated panels.  

• An economical hand cup for use with flat material surfaces.
• Enables ergonomic handling and proper lifting technique for heavy, awkward materials.
• Helps prevent worker fatigue and avoid worker injury.
• Vacuum pad will not mark or damage most surfaces.
• Rapid apply and release times increase worker productivity.
• Patented red-line indicator alerts worker of any significant vacuum loss, reducing the risk of dropped loads.
• Check valve allows vacuum cup to be repumped without releasing it from the material.
• Available Audio Alarm alerts user of any significant loss in vacuum.

model:
N4000

• Setting roof panels into position.
• Setting wall panels into position.
• Setting cold storage panels into position.
• Tying off control lines to insulated panels.  

• Designed for use at elevations up to 12,000 feet [3650 meters].
• Enables ergonomic handling and proper lifting technique for heavy, awkward materials.
• Helps prevent worker fatigue and avoid worker injury.
• Vacuum pad will not mark or damage most surfaces.
• Rapid apply and release times increase worker productivity.
• Patented red-line indicator alerts worker of any significant vacuum loss, reducing the risk of dropped loads.
• Check valve allows vacuum cup to be repumped without releasing it from the material.

model:
N4100

• Setting roof panels into position.
• Setting wall panels into position.
• Setting cold storage panels into position.
• Tying off control lines to insulated panels.  

• All-metal pump and handle provide maximum durability.
• Enables ergonomic handling and proper lifting technique for heavy, awkward materials.
• Helps prevent worker fatigue and avoid worker injury.
• Vacuum pad will not mark or damage most surfaces.
• Rapid apply and release times increase worker productivity.
• Patented red-line indicator alerts worker of any significant vacuum loss, reducing the risk of dropped loads.
• Check valve allows vacuum cup to be repumped without releasing it from the material.
• Available Audio Alarm alerts user of any significant loss in vacuum.

model:
N4950

• Lifting semi-flexible metal panels.
• Constructing a pole barn.
• Constructing a steel building.
• Tying off control lines to metal panels.  

• All the advantages of the N4950 hand cup plus greater load capacity and flexible edges for materials that may bend slightly when lifted.
• Enables ergonomic handling and proper lifting technique for heavy, awkward materials.
• Helps prevent worker fatigue and avoid worker injury.
• Vacuum pad will not mark or damage most surfaces.
• Rapid apply and release times increase worker productivity.
• Patented red-line indicator alerts worker of any significant vacuum loss, reducing the risk of dropped loads.
• Check valve allows vacuum cup to be repumped without releasing it from the material.
• Available Audio Alarm alerts user of any significant loss in vacuum.

model:
N5450

• Setting small roof panels into position.
• Setting small wall panels into position.
• Setting small storage panels into position.
• Setting small insulated panels into position.

• Ergonomically designed handle provides ease of handling and maximum load control.
• Enable proper lifting technique for heavy, awkward materials.
• Help prevent worker fatigue and avoid worker injury.
• Vacuum pad will not mark or damage most surfaces.
• Rapid apply and release times increase worker productivity.
• Patented red-line indicator alerts worker of any significant vacuum loss, reducing the risk of dropped loads.
• Check valve allows vacuum cups to be repumped without releasing it from the material.

models:
LJ45HG
TL6HG
LP6HG

• Setting roof panels into position.
• Setting wall panels into position.
• Setting cold storage panels into position.
• Setting insulated panels into position.
• Constructing a pole barn.
• Constructing a steel building.
• Tying off control lines to metal panels.  

• Ergonomically designed to promote ease of materials handling.
• Helps prevent worker fatigue and avoid worker injury.
• Leaves material edges free for placement in frames and similar operations.
• Rapid apply and release times increase worker productivity.
• High-quality, industrial strength construction for durability.
• 12-month warranty against defects in materials or craftsmanship.

all models