More versatile than magnets and faster than clamps and slings, vacuum lifters are an
efficient and economical means of moving materials. They help reduce load damage and
operator fatigue, strain and injury, resulting in greater worker satisfaction and
increased productivity.
Because the load is on the lifter and crane, rather than the operator, one person often
can handle the load, reducing the costs of labor, injuries and lost time. Powr-Grip
manufactures a full line of rotators, tilters, rotator / tilter combinations,
flat and vertical lifters with AC, DC or air-powered vacuum pumps. Capacities to 1400 lbs
[635 kg]
MTCL6FS818DC & MTCL8HV11FDC • Cladding Lifters 700
These highly adaptable vacuum lifters are specifically designed to lift cladding materials: They feature DC power and manual 90° tilt with hydraulic damping and automatic latching, when desired, to transfer on-site materials easily from the flat position to the upright position, or vice versa. Specialized vacuum pads conform to surface contours typical of cladding materials. Operators can easily reposition or remove vacuum pads and pad frame extensions, as needed to obtain optimal support of the materials. A dual vacuum system helps to reduce the risk of falling loads. 700 lbs [320 kg] capacity.
MRT49DC, MRT4HV11DC & MRT411LDC • Manual Rotator / Tilters
Delivering manual 360° rotation and 90° tilt from any rotated position, these lifters
provide economy and versatility in the shop or at the installation site. Movable pads and extension arms create three frame configurations for handling nearly any size load. Cord-free,
DC power allows operation from cranes or floor hoists. Capacities to 700 lbs [320 kg].
MRTALP611LDC & MRTALPCH611LDC • Low-Profile Series Manual Rotator/Tilters 1100
A low-profile design makes these vacuum lifters ideal for installing construction materials between buildings and scaffolding or similar narrow locations. 180° manual rotation and 90° manual tilt provide ample load maneuverability, while a specially designed tilt mechanism significantly reduces operator effort. Adaptable pad frames supply the flexibility to handle various load dimensions, and on-board DC power allows for use at construction sites or any location lacking AC power. Powr-Grip's Dual Vacuum System also comes standard on these vacuum lifters, to reduce the risk of falling loads which might otherwise occur in an emergency. 1100 lbs [500 kg] maximum capacity.
MRTALP611LDC
Low-profile vacuum lifter with (re)movable vacuum pad mounts and pad frame extension arms.
MRTA611LDC • Quadra-Tilt Rotator 1100
In addition to 360° manual rotation, this lifter features an innovative four-bar tilt mechanism that radically reduces the effort needed for tilting loads between upright and flat positions. (Re)movable pads and extension arms create numerous frame configurations, to accommodate a wide variety of load sizes and shapes. It also comes standard with a dual vacuum system, designed to reduce the risk of falling loads. Cord-free, DC power allows operation from forklifts or cranes. 1100 lbs [500 kg] capacity.
P1 & P2 Series • Channel Lifters
These modular lifters are
expandable to meet a variety of materials handling needs. Interchangeable lift frames
provide manual 180° rotation and 90° tilt. On-board DC power permits cord-free use with
cranes or floor hoists. AC powered units are also available.
P11104DC, P11004DC
& P1HV1104DC
Single-channel lifters. Capacities to 700 lbs [320 kg]. More info...
P2110445DC & P2HV110445DC
Double-channel lifters with approx.
4-1/2' [1,38 m] pad spread. Capacities to 1400 lbs [635 kg]. The P2110445DC is available
for leasing in some areas. More info...
P211047DC & P2HV11047DC
Double-channel lifters with approx. 7'
[2,14 m] pad spread. Capacities to 1400 lbs [635 kg]. The P211047DC is available for leasing in some areas. More info...
PF Series • Powr-Frames 700
Featuring manual 180°
rotation and 90° tilt, Powr Frames offer economy and versatility at the job site or in
the factory. Units are available with either cord-free DC power systems or economical AC
pumps. 700 lbs [320 kg] capacity.
HF Series • Rotate and Tilt Hand Cup Frames
Hand Cup Frames are an inexpensive way to put Powr-Grip Hand Cups to work on a crane,
hoist or forklift. They feature manual 180° rotation and 90° tilt between upright
and flat. When used with Powr-Grip's N5450 Hand Cups, the capacity is 700 lbs [320 kg].
MRLPCH611LDC • Low-Profile Manual Rotator 1100
The linear design of this Powr-Grip 180° rotator is indispensable for installing glass and other construction materials in narrow locations. Removable pad frame extensions give the MRLPCH611LDC vacuum lifter the flexibility to handle various load dimensions, while still offering a relatively high load capacity in its six-pad configuration. On-board DC power makes this vacuum lifter ideal for use at the construction site or wherever AC power is not readily available. 1100 lbs [500 kg] maximum capacity.
PR2811LDC • Power Rotator 3400
Designed for constructing curtain walls, the Power Rotator 3400 offers maximum flexibility for handling enormous architectural components. Along with a maximum load capacity of 3,400 lbs [1540 kg], the PR2811LDC Vacuum Lifter features powered 360° rotation with an adjustable electronic speed controller, to give the operator precise control and smooth, effortless load positioning. Removable vacuum pads, removable pad arms and removable pad frame sections allow for numerous configurations of the vacuum pads, to accommodate a wide variety of material sizes and shapes. A movable control pendant also allows the operator to control the vacuum system and rotation functions at a distance from the lifter. A self-contained DC power system provides cord-free operation at any construction site.
All Products
View for printing
Download Spec Sheet
Send to a colleague
