The installation of pattern glass and other textured glass has long been a challenge to designers, architects and glaziers alike. Since 1964, Wood's Powr-Grip® has been making glass installation easier and less dangerous with hand-held vacuum cups, below-the-hook vacuum lifters and other installation products. Today, WPG continues to make pattern glass handling more efficient, ergonomic and secure through innovative engineering.

• Specially designed vacuum pads on certain Powr-Grip hand cups use softer rubber for attaching to textured or irregular surfaces.
• Flexible foam rubber in closed-cell foam rings helps WPG vacuum pads conform to irregular surfaces.
• CF13CEO Pad Frame T-Arm Assemblies are available on Powr-Grip MRT and MRTA vacuum lifters, for loads with highly textured surfaces.
• VPFS625 vacuum pads feature flexible foam rubber that conforms to surface contours up to 3/8" [10 mm].

Whether you are working with pattern glass, etched glass, sandblasted glass, frosted glass or other kinds of privacy glass, Wood's Powr-Grip has the products to install textured glass more easily and safely.

• Put a handle where you need it on pattern glass and textured glass.
• Install any size glass that can be lifted manually.  
• Handle lites of nearly every size and shape.  
• Install Plexiglass®, Lexan® and virtually all other nonporous construction materials.
• Transport shower doors and other awkward glass products with ease.  

• Specially designed vacuum pad grips textured and irregular surfaces.
• Ergonomically designed to promote ease of glass handling.
• Helps prevent worker fatigue and avoid worker injury.
• Rapid apply and release times increase worker productivity.
• High-quality, industrial strength construction for durability.
• 12-month warranty against defects in materials or craftsmanship.

model:
N4000TS

• Put a handle where you need it on pattern glass and textured glass.
• Install any size glass that can be lifted manually.  
• Handle lites of nearly every size and shape.  
• Install Plexiglass®, Lexan® and virtually all other nonporous construction materials.
• Transport shower doors and other awkward glass products with ease.  

• Specially designed vacuum pad grips textured and irregular surfaces.
• Ergonomically designed to promote ease of glass handling.
• Helps prevent worker fatigue and avoid worker injury.
• Rapid apply and release times increase worker productivity.
• High-quality, industrial strength construction for durability
• 12-month warranty against defects in materials or craftsmanship.

model:
N4950TS

• Uses compressed air supply to handle glass quickly and efficiently at commercial or residential job sites.
• Put a handle where you need it on pattern glass and textured glass.
• Install Plexiglass®, Lexan® and virtually all other nonporous construction materials.
• Handle shower enclosures and other awkward glass products with ease.

• Closed-cell foam ring conforms to textured or irregular surfaces.
• Attaches quickly without any pumping, and it never needs to be repumped during operation.
• Ergonomically designed to promote ease of load handling.
• Helps prevent worker fatigue and avoid worker injury.
• Rapid apply and release times increase worker productivity.
• High-quality, industrial strength construction for durability.
• 12-month warranty against defects in materials or craftsmanship.

model:
NHV11FAIR

• Perfect for installing small panes of pattern glass and textured glass.
• Install decorative glass windows in multi-story buildings.
• Good for sloped glazing or fenestration at any angle.
• Construct, repair or maintain building facades.

• Little footprint enables attachment on small panes.
• Standard Dual Vacuum System helps reduce risk of falling glass.
• Available closed cell foam pad rings enable attachment on pattern glass or textured glass.
• An economical solution for pattern glass installation.
• 180º rotation and 90º tilt provide a wide range of motion for glass manipulation.
• On-board DC power system enables cord-free operation at the job site.
• Lightweight construction facilitates transporting, storing and moving lifter on the job site.
• Compliant with relevant CE, AS, and ANSI standards.

model:
P1HV1102DC
 

• Install long, narrow panes of pattern glass and textured glass.
• Handle glass between buildings and scaffolding.
• Perfect for sloped glazing or fenestration at any angle.
• Construct, repair or maintain building facades and curtainwalls.  

• Available closed cell foam pad rings enable attachment on pattern glass or textured glass.
• An economical solution for glass installation.  
• Low profile is ideal for installing glass in tight work locations.
• 180º rotation and 90º tilt provide a wide range of motion for glass manipulation.
• On-board DC power system enables cord-free operation at the job site.
• Available Dual Vacuum System helps reduce risk of falling glass.
• Compliant with relevant CE, AS, and ANSI standards.

model:
P1HV1104DC

WPG Manual Rotator/Tilter 600

• Transport large panes of pattern glass and textured glass effortlessly on the job site.
• Glaze multi-story buildings or construct curtainwalls.  
• Perfect for sloped glazing or fenestration at any angle.  
• Repair or maintain building facades and curtainwalls.
• Install glass under overhangs, with Adaptable Length Lift Bar or Forklift Adapter options.  

• Available closed cell foam pad rings enable attachment on pattern glass or textured glass.
• Multiple frame configurations enable the operator to handle a wide variety of glass sizes and shapes.
• Continuous 360º rotation and 90º tilt provide a wide range of motion for glass manipulation.
• On-board DC power system enables cord-free operation at the job site.  
• Avoid the expense and inconvenience of scaffolding or scissor lifts.
• Available Dual Vacuum System helps reduce risk of falling glass.
• Compliant with relevant CE, AS, and ANSI standards.

model:
MRT4HV11DC

WPG Low-Profile Manual Rotator/Tilter 900

• Install glass between buildings and scaffolding.
• Transport large panes of pattern glass and textured glass effortlessly on the job site.
• Glaze multi-story buildings or construct curtainwalls.
• Perfect for sloped glazing or fenestration at any angle.
• Repair or maintain building facades and curtainwalls.

• All the advantages of the MRT4HV11DC plus increased load capacity.
• Standard closed cell foam pad rings enable attachment on pattern glass or textured glass.
• Low profile is ideal for installing glass in tight work locations.
• Standard Dual Vacuum System helps reduce risk of falling glass.
• Multiple frame configurations enable the operator to handle a wide variety of glass sizes and shapes.
• 180º rotation and 90º tilt provide a wide range of motion for glass manipulation.
• On-board DC power system enables cord-free operation at the job site.
• Compliant with relevant CE and ANSI standards.

model:
MRTALP6HV11FDC

• Install glass between buildings and scaffolding.
• Transport long panes of pattern glass and textured glass effortlessly on the job site.
• Glaze multi-story buildings or construct curtainwalls.
• Perfect for sloped glazing or fenestration at any angle.
• Repair or maintain building facades and curtainwalls.

• Available closed cell foam pad rings enable attachment on pattern glass or textured glass.
• Linear design provides proper support for long glass products.
• Low profile is ideal for installing glass in tight work locations.
• Two frame configurations enable the operator to handle a variety of glass sizes.
• Standard Dual Vacuum System helps reduce risk of falling glass.
• 180º rotation and 90º tilt provide a wide range of motion for glass manipulation.
• On-board DC power system enables cord-free operation at the job site.
• Compliant with relevant CE and ANSI standards.

model:
MRTALPCH6HV11DC

• Transport large panes of pattern glass and textured glass effortlessly on the job site.
• Glaze multi-story buildings or construct curtainwalls.
• Perfect for sloped glazing or fenestration at any angle.
• Repair or maintain building facades and curtainwalls.

• All the advantages of the MRT4HV11DC plus increased load capacity.
• Standard closed cell foam pad rings enable attachment on pattern glass or textured glass.
• Standard Dual Vacuum System helps reduce risk of falling glass.
• Continuous 360º rotation and 90º tilt provide a wide range of motion for glass manipulation.
• Innovative tilt mechanism radically reduces operator effort.
• Multiple frame configurations enable the operator to handle a wide variety of glass sizes and shapes.  
• On-board DC power system enables cord-free operation at the job site.
• Compliant with relevant CE, AS, and ANSI standards.

model:
MRTA6HV11FDC

• Transport large, heavy panes of pattern glass and textured glass effortlessly on the job site.
• Glaze multi-story buildings or construct curtainwalls.
• Perfect for sloped glazing or fenestration at any angle.
• Repair or maintain building facades and curtainwalls.

• All the benefits of the MRT4HV11DC plus a higher load capacity than the MRTA6HV11FDC.
• Available closed cell foam pad rings enable attachment on pattern glass or textured glass.
• Standard high-flow vacuum system for fast apply and release times.
• Multiple frame configurations enable the operator to handle a wide variety of glass sizes and shapes.
• Continuous 360º rotation and 90º tilt provide a wide range of motion for glass manipulation.
• Innovative tilt mechanism radically reduces operator effort.
• On-board DC power system enables cord-free operation at the job site.
• Alternate version comes standard with movable control pendant and is field-ready for conversion to our Remote Control System option.
• Compliant with relevant AS and ANSI standards.

model:
MRTA8HV11DC

• Transport large, heavy panes of pattern glass and textured glass effortlessly on the job site.
• Glaze multi-story buildings or construct curtainwalls.
• Handle extremely heavy glass products, including bulletproof and hurricane-proof glass.
• Repair or maintain building facades and curtainwalls.

• Standard closed cell foam pad rings enable attachment on pattern glass or textured glass.
• Powered 90º tilt provides precise tilt control for glass manipulation and reduces risk of injury to workers.
• Standard high-flow vacuum system for fast apply and release times.
• Standard vacuum pad shutoffs enable the operator to handle a wide variety of glass sizes and shapes.
• On-board DC power system enables cord-free operation at the job site.
• Available AC or compressed air power system to run off job site generator or compressor.
• Compliant with relevant AS and ANSI standards.

model:
PT10HV11FAIR

• Used with MRT4-DC to lift pattern glass and other materials with high relief.
• Used with MRTA6-DC to lift pattern glass and other materials with high relief.
• Used with MRTALP6-DC to lift pattern glass and other materials with high relief.
• Used with MRTA8-DC to lift pattern glass and other materials with high relief.

• Vacuum pads feature flexible foam rubber that conforms to surface contours up to 3/8" [10 mm].
• Extensions are equipped with sliding pad mounts for maximum flexibility to handle different size loads.
• Cotterless hitch pins and vacuum hose quick connectors make installation fast and easy, without the need for tools.
• Optionally available with new vacuum lifters or retrofittable to existing vacuum lifters.
• High-quality, industrial strength construction for durability.
• 12-month warranty against defects in materials or craftsmanship.

model:
CF13CEO