Multipurpose Vacuum Lifters for Stone Handling by Wood's Powr-Grip®
Designed to be lightweight and rugged, Powr-Grip Multipurpose Vacuum Lifters provide an efficient and economical approach to stone installation and low-volume processing. Multipurpose Rotator / Tilters incorporate manual rotation and tilt for quick and precise slab positioning. 12-volt/DC vacuum pumps are standard, allowing cord-free operation of these vacuum lifters at the job site or in the stone yard.
MRT4HV11DC • Manual Rotator / Tilter 600
Delivering manual 360° rotation and 90° tilt from any rotated position, this vacuum lifter provides economy and versatility in the shop or at the installation site. Movable vacuum pads and extension arms create three configurations of the vacuum pads, for handling slabs of nearly any size. Cord-free DC power allows operation of the vacuum lifter from cranes, forklifts or floor hoists. When equipped with a Forklift Adapter (LB7FAO option), this vacuum lifter mounts directly to the forks, for handling slabs within the stone yard or installing stone facades under overhangs or in other low-clearance settings. 600 lbs [270 kg] capacity.
MRTA611LDC • Quadra-Tilt Rotator 1100
In addition to 360° manual rotation, this vacuum lifter features an innovative, four-bar tilt mechanism that radically reduces the effort needed for tilting slabs 90° between the upright and flat positions. (Re)movable vacuum pads and extension arms allow for numerous configurations of the vacuum pads, to accommodate a wide variety of stone sizes and shapes. This vacuum lifter also comes standard with Powr-Grip's Dual Vacuum System, designed to reduce the risk of falling loads. Operating the vacuum lifter from cranes, forklifts or overhead hoist systems is easy with cord-free DC power. 1100 lbs [500 kg] capacity.
MRTA8HV11DC • Quadra-Tilt Rotator 1200
Like the MRTA611LDC Vacuum Lifter, the MRTA8HV11DC Quadra-Tilt Rotator offers cord-free DC power, 360° manual rotation, mechanically assisted 90° manual tilt, and (re)movable vacuum pads and extension arms, for lifting nearly any size or shape of stone. In addition to all these advantages, the MRTA8HV11DC Vacuum Lifter comes standard with greater load capacity and a high-flow vacuum system, to help overcome leakage associated with semiporous or contaminated stone surfaces. 1200 lbs [545 kg] capacity.
P1HV1104DC, P2HV110445DC & P2HV11047DC • Channel Lifters
These modular vacuum lifters are expandable to meet a variety of stone handling needs. Interchangeable Lift Frames provide manual 180° rotation and 90° tilt. Pad Channels can be switched from one Lift Frame to another in minutes, for maximum versatility at the installation site. On-board DC power permits cord-free use of the vacuum lifter with cranes, forklifts or floor hoists. AC powered vacuum lifters are also available. When combined with the CB1 Counter-Balancer, double-channel vacuum lifters can be used to install facades under overhangs or in other low-clearance settings. Download Spec Sheet (all models)
PF Series • Powr-Frame Vacuum Lifters
Featuring manual 180° rotation and 90° tilt, Powr-Frame Vacuum Lifters offer economy and versatility at the job site or in the shop. A wide variety of models lets you select the vacuum lifter that best meets your stone handling requirements: Different configurations of vacuum pads are available for long and tall slabs, as well as for two different groups of stone weights. PF Series Vacuum Lifters are available with either cord-free DC power systems or economical AC pumps.
Powr-Frames 700
Vacuum lifters with 6 vacuum pads, available in three different pad frame configurations. Optionally available with HV11 vacuum pads, to resist abrasion from rough or contaminated stone surfaces. 700 lbs [320 kg] capacity.
Powr-Frames 1000
Vacuum lifters with 8 vacuum pads, available in two different pad frame configurations. Optionally available with HV11 vacuum pads, to resist abrasion from rough or contaminated stone surfaces. 1000 lbs [455 kg] capacity.
All Products
View for printing
Send to a colleague
